HDMI CABLE EXTENDERS This uses power from the HDMI bus to repeat the signal, therefore no external power supply is required. It allows cable runs to be extended up to 30 metres, according to cables used. It also can permit smaller gauge HDMI cables to be used, thus making installations easier in confined spaces. The … Continue reading "HDMI CABLE EXTENDER"

The Altusen USB CPU adapters connect KVM cables to the USB console ports of the servers. Those adapters are light and in small form factor, fit perfectly into most of the rack-mount or desktop servers.

Used to blank off unused sections of 19 inch racks to give a tidy appearance and maintain rack-cooling airflow, these panels are also suitable for mounting connectors, switches, indicators or other items where an enclosure is not required and a more elegant solution such as the Canford ‘Universal connection system’ – which simplifies mounting a … Continue reading "CANFORD RACK PANEL BLANK, FULL WIDTH 5U Flat aluminium, dawn greyDawn Grey"

PRODUCT HIGHLIGHTS Aluminum Tripod Pan and Tilt Fluid Head Sliding Plate Included Super Torque System Load Capacity of 17.5 lb Maximum Height of 65.4" Outstanding Rigidity Floor Spreader Included Tripod Case Included

K&M (Konig & Meyer) 25400

Order number: EV4560064 Manufacturer: Electro-Voice Warranty: 60 months

RJ45 STRAIN RELIEF BOOTS Moulded strain relief boots with latch cover suitable for use with most RJ45 connectors. Nominal internal diameter 5.5mm (suits cables up to 6.0mm) and 6.0mm (suits cables up to 6.4mm). For Cat5E, the 5.5mm will normally be suitable, for Cat6, the 6.0mm. They are available in two formats, the standard type … Continue reading "RJ45 BUSH 6.0MM GRAY"

Specifications: DB-37 PIN  Female Solder type connector Tin plated steel shell Used for the construction of serial cables, parallel cables, and various gaming applications.

42" Full HD 1080p LCD TV Full HD 1920 X 1080p Built-in PAL/SECAM/Digital DVB-T TV tuners PAL/NTSC/SECAM World Wide HDTV 3 HDMI Inputs Game Mode Media Player (USB Playback) PC Input Terminal 2,000,000:1 Contrast Ratio HDMI Input Only 3.5" Deep Automatic world wide voltage: 100-240 Volts 50/60 HZ

ADAPTERS Designation denotes configuration of adapter contacts. All adapters are supplied pre-wired. 49-219 has “phase reverse” legend engraved in red. Adapters wired for MIDI are engraved “MIDI” at the DIN connector end. 49-229 allows 3 pole B gauge plugs to operate into 3 pole A gauge sockets. 49-230 operates vice-versa. 49-200 is XLR male/female unwired, for user’s specially wired applications. Wiring conventions: XLR … Continue reading "ADAPTER 3FX-BNCF"

FLEXIBLE AC MAINS POWER CABLES A range of flexible mains cables with stranded conductors, all with either PVC, Arctic PVC or TRS (heat resisting rubber) jackets. Arctic grade PVC remains flexible at temperatures down to –20° C; at normal temperatures cables are very limp and flexible, but note that Arctic PVC jacketed cables are not … Continue reading "FLEXIBLE MAINS 3 core 6 sq.mm, Black rubber"

Application: High temperature, flame retardant cable designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.

RJ45 STRAIN RELIEF BOOTS Moulded strain relief boots with latch cover suitable for use with most RJ45 connectors. Nominal internal diameter 5.5mm (suits cables up to 6.0mm) and 6.0mm (suits cables up to 6.4mm). For Cat5E, the 5.5mm will normally be suitable, for Cat6, the 6.0mm. They are available in two formats, the standard type … Continue reading "RJ45 STRAIN RELIEF BUSH 5.5mm, flush profile, red"

CANFORD XLR TERMINATION PANELS Standard Layouts A range of audio termination panels supplied fully populated with Neutrik ‘D’ series XLR connectors. Nine combinations of 3-pin XLR male and latching female connectors are available as standard, all have nickel-plated shells and silver-plated contacts and are mounted from the rear of the panel. Custom Layouts Custom ‘D’ … Continue reading "XLR TERMINATION PANEL 1U-1X16 XLRM,GREY"

CANFORD MDU5 AC MAINS POWER DISTRIBUTION UNIT – 12x IEC outlet – IEC inlet with IEC loop-out This range of twelve-way, IEC outlet, AC mains power distribution panels with a 10 amp IEC inlet and IEC ‘loop-out’ outlet, is housed in a compact 1U rackmount case. The loop-out feature provides an un-switched, direct loop-through power … Continue reading "CANFORD MDU5 AC MAINS POWER DISTRIBUTION UNIT Green, greyGreenGrey"

The K&M 254 Tripod Microphone stand and boom offers sturdy support for live sound and recording applications. The stand features a fixed length boom measuring at 32″ and the stands height is adjustable between 32.68 – 59.84″. Construction Zinc Diecast Base Stand Height Adjustable: 32.68 – 59.84″ (830-1519mm) Boom Length Adjustable: 32″ (805mm) Base Type … Continue reading "K&M 254 Tripod Microphone Stand with 32″ Boom (Black)"

Download catalog (PDF)

BRAIDED SLEEVING – EXPANDABLE This sleeving consists of polyethylene terepthalate (PET) monofilaments braided in such a way as to allow the diameter to expand by a minimum of 60% either by compressing the sleeving or by the insertion of cable and/or components. It is principally useful for looming a number of different cables together, for … Continue reading "EXPANDABLE SLEEVING Size 115"

NEUTRIK XLR PANEL CONNECTOR FEED-THROUGH ADAPTERS These feed-through 3-pin XLR adapters are mounted on a ‘D’ series mounting flange. NA3FDM has female contacts at the front and male at the rear, overall length 57mm. NA3MDF is not a wooden version, but has the standard metal construction with male contacts at the front and female at the rear, overall … Continue reading "NEUTRIK XLR NA3FDM Feed-through panel adapter, female to male"

Extend digital signage or KVM applications with this cable. DVI-I-DL-001.5M