Manufacturer: Ross Video Product Name: DRA-8204-R2 Short Description: Dual MD-SDI Reclocking Amplifier (143 to 1485 Mb/s) with 10-BNC R2-8204 Rear Module.

RJ45 STRAIN RELIEF BOOTS Moulded strain relief boots with latch cover suitable for use with most RJ45 connectors. Nominal internal diameter 5.5mm (suits cables up to 6.0mm) and 6.0mm (suits cables up to 6.4mm). For Cat5E, the 5.5mm will normally be suitable, for Cat6, the 6.0mm. They are available in two formats, the standard type … Continue reading "RJ45 STRAIN RELIEF BUSH 5.5mm, flush profile, red"

Designation denotes configuration of adapter contacts, all adapters supplied pre-wired. ‘T’ adapters act as splitters/combiners. Terminology used in adapter descriptions: BNCF: BNC female BNCM: BNC male PHF: Phono (RCA) female PHM: Phono (RCA) male NF: N female NM: N male 83F: 83 female 83M: 83 male TNCF: TNC female TNCM: TNC male 3FX: 3 pin … Continue reading "T-ADAPTER 2BNCF-BNCM 75 ohm"

DKM-LFH SERIES – DIGITAL AUDIO OVERALL FOIL SCREENED SOLID CONDUCTOR MULTIPAIR CABLE Low fire hazard Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors, risers etc. Under combustion circumstances, LFH cables have significantly reduced smoke emission, and the gaseous products contain no toxic halogens. … Continue reading "CANFORD DKM-LFH CABLE 25 pair"

Application: High temperature, flame retardant cable designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.

The S4.16 UHF range may be switched between sixteen frequencies. In the case of the channel 38 versions, up to eight systems may be used simultaneously and up to twelve may be used with the channel 69/70 models, four of which may be used license-free in the UK on channel 70. Systems are available with … Continue reading "TRANTEC S4.16L-EA-UK RADIOMIC SYSTEM UHF"

D-Sub Hood Cover for 9 Pin or 15 Pin Plastic socket Specifications: Plastic hood for DB-9 PIN or DB-15 pin connector Include hardware and screw-in strain relief Used for 9-pin or 15-pin D-subminiature connectors

8-position 8-wire modular plug Use with 24 - 26 AWG Shielded copper cable.

Specifications: DB-37 PIN  Female Solder type connector Tin plated steel shell Used for the construction of serial cables, parallel cables, and various gaming applications.

Features Shielding prevents interference from external sources Greater reduction of interference such as crosstalk Provides NEXT performance beyond 600 MHz Supports IEEE 802.3af and is DTE power compliant Low-profile hood is ideal for high-density switch applications PoE rated to four times the standard FireFold Signature Lifetime Warranty

Features & Benefits Allow long cable runs for digital audio signals via low attenuation coax lines Match balanced to coaxial lines Match impedances 110 Ω to 75 Ω Simple to use, passive units

CANFORD RACKPANEL – FULL RACK WIDTH – Blank rack panels, 19 inch Used to blank off unused sections of 19 inch racks to give a tidy appearance and maintain rack-cooling airflow, these panels are also suitable for mounting connectors, switches, indicators or other items where an enclosure is not required and a more elegant solution … Continue reading "RACK PANEL BLANK, FULL WIDTH 5U Flat aluminium, dawn grey"

D-SUB CONNECTORS Solder contact D-sub connectors, available in 9, 15, 25, 37 and 50 pin versions. Plug shells are tinned and dimpled. Stamped contact design, gold over nickel plate, rated 5A per contact. Crimp contact types available in 9, 15 and 25 pin versions. Crimp contacts are gold plated, and supplied in strips of 100. … Continue reading "D-SUB 25 PIN MALE"

Designation denotes configuration of adapter contacts. All adapters are supplied pre-wired. 49-219 has “phase reverse” legend engraved in red. Adapters wired for MIDI are engraved “MIDI” at the DIN connector end. 49-229 allows 3 pole B gauge plugs to operate into 3 pole A gauge sockets. 49-230 operates vice-versa. 49-200 is XLR male/female unwired, for user’s specially wired applications. Wiring conventions: XLR pin … Continue reading "ADAPTER 3MX-BNCF"

HST – HELICAL SCREENED STRANDED CONDUCTOR TWIN CABLE A high performance range of general purpose extra-flexible twisted twin conductor, helical (“lap”) screened cables, suitable for both microphone and general purpose uses. The cable construction design is the result of extensive research by Canford Audio, and the University of Durham Engineering Department. The outer jacket is … Continue reading "CANFORD HST CABLE 1 pair, Black"

WALTHER INDUSTRIAL AC MAINS POWER CONNECTORS A range of industrial plugs, connectors, socket outlets and appliance inlets designed to meet BS EN 60309 -1:1999, BS EN 60309 -2:1999 and splash-proof to IP44. Connector bodies are resilient polyamide, contact pins and sleeves are brass. Connectors are rated 200-250V AC, 16 amp, 2-pole plus earth or 32 … Continue reading "WALTHER 534306 Splashproof 32A surface mounting socket outlet, angled"

A range of industrial plugs, connectors, socket outlets and appliance inlets designed to meet BS EN 60309 -1:1999, BS EN 60309 -2:1999 and splash-proof to IP44. Connector bodies are resilient polyamide, contact pins and sleeves are brass. Connectors are rated 200-250V AC, 16 amp, 2-pole plus earth or 32 amp, 2-pole plus earth. Cable connectors … Continue reading "WALTHER 230306 Splashproof 32A cable plug, straight"

JWH SERIES – UNSCREENED TWISTED PAIR SOLID CONDUCTOR JUMPER WIRE Solid conductor 1 and 2-core jumper wires specifically for use with Krone and other IDC systems. CW1423 type These have a hardened grade of PVC for their outer insulation, specifically designed for use in larger wiring frames, where the wires may be subject to more … Continue reading "JUMPER WIRE JWH2 WHITE/RED"

CANFORD XLR TERMINATION PANELS Standard Layouts A range of audio termination panels supplied fully populated with Neutrik ‘D’ series XLR connectors. Nine combinations of 3-pin XLR male and latching female connectors are available as standard, all have nickel-plated shells and silver-plated contacts and are mounted from the rear of the panel. Custom Layouts Custom ‘D’ … Continue reading "XLR TERMINATION PANEL 1U-1X16 XLRM,GREY"

CANFORD RACKPANEL – Full rack width – Blank rack panels, 19 inch Used to blank off unused sections of 19 inch racks to give a tidy appearance and maintain rack-cooling airflow, these panels are also suitable for mounting connectors, switches, indicators or other items where an enclosure is not required and a more elegant solution … Continue reading "CANFORD RACK PANEL BLANK, FULL WIDTH 1U Flat aluminium, dawn greyDawn Grey"