FSJ-LFH SERIES – FOIL SCREENED STRANDED CONDUCTOR INDIVIDUALLY JACKETED MULTIPAIR CABLE Low Fire Hazard
This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene).
It is a low fire hazard (‘LSOH’) cable based on Canford’s FST-LFH twin conductor, foil screened cable, for installed applications. The construction is a number of these cables, each printed with a core identification, and sheathed overall in an LFH material. The individual cores are jacketed ready for termination directly into connectors etc., and the inner jacket is bonded to the screening foil so strips away in a single action.
|Pair conductors:||7/0.20mm (0.22 sq.mm) tinned copper wire|
|Pair insulation:||Foamed polypropylene, OD 4.0mm, red, black|
|Screen:||Aluminium/Polyester tape with 7/0.20mm, tinned copper drain wire|
|Pair jacket:||LFH material, OD 4.0mm, yellow|
|Overall lay-up:||Each individual jacket sequentially numbered|
|Outer sheath:||LFH material, black, printed with metre markings|
|Overall diameter:||4 pair 11.3mm, 8 pair 15.1mm, 12 pair 17.7mm, 16 pair 19.7mm, 24 pair 25.1mm|
|Capacitance:||100pF/metre core to core, 198pF/metre core to core + screen|
|Conductor resistance:||81 ohms/km maximum|
|Weight (kg/100 metres):||4 pair 13.4kg, 8 pair 22.5kg, 12 pair 31.2kg, 16 pair 40.4kg, 24 pair 61.8 kg|
|Reel length:||500 metres|
|Cut lengths:||Available in any multiple of 1 metre|